Publications



Databases & repositories




Complete list of academic publications


  1. Della Crociata, D., et al. On the development of twinning-induced plasticity in additively manufactured 316L stainless steel, Addit. Manuf. Lett. (2023), 7, art. no. 100176.
  2. Padrão, D., et al. New structure-performance relationships for surface-based lattice heat sinks, Appl. Therm. Eng. (2023), 236, art. no. 121572.
  3. Bhuwal, A., et al. Creep Characterization of Inconel 718 Lattice Metamaterials Manufactured by Laser Powder Bed Fusion, Appl. Eng. Mater. (2023), art. no. 2300643.
  4. Maskery, I., et al. FLatt Pack: a research-focussed lattice design program, Addit. Manuf. (2022), 49, art. no. 102510.
  5. Lehder, E.F., et al. A Multiscale Optimisation Method for Bone Growth Scaffolds Based on Triply Periodic Minimal Surfaces, Biomech. Model. Mechanobiol. (2021), 20, pp. 2085-2096.
  6. Maskery, I., et al. The deformation and elastic anisotropy of a new gyroid-based honeycomb made by laser sintering, Addit. Manuf. (2020), 36, art. no. 101548.
  7. Cooper, N., et al. Additively manufactured ultra-high vacuum chamber for portable quantum technologies, Addit. Manuf. (2021), 40, art. no. 101898.
  8. Sélo, R.J., et al. On the thermal conductivity of AlSi10Mg and lattice structures made by laser powder bed fusion, Addit. Manuf. (2020), 34, art. no. 101214.
  9. Elmadih, W., et al. Three-dimensional resonating metamaterials for low-frequency vibration attenuation, Sci. Rep. (2019), 9, art. no. 11503.
  10. Prève, D., et al. A comprehensive characterization of fracture in unit cell open foams generated from Triply Periodic Minimal Surfaces, Eng. Fract. Mech. (2023), 277, art. no. 108949.
  11. Yang, N., et al. Combinational design of heterogeneous lattices with hybrid region stiffness tuning for additive manufacturing, Mater. Des. (2021), 209, art. no. 109955.
  12. Juasiripukdee, P., et al. Low Thermal Expansion Machine Frame Designs Using Lattice Structures, Appl. Sci. (2021), 11, art. no. 9135.
  13. Meng, H., et al. Optimal design of rainbow elastic metamaterials, Int. J. Mech. Sci. (2020), 165, art. no. 105185.
  14. Meng, H., et al. Rainbow metamaterials for broadband multi-frequency vibration attenuation: Numerical analysis and experimental validation, J. Sound Vib. (2020), 465, art. no. 115005.
  15. Elmadih, W., et al. Multidimensional phononic bandgaps in three-dimensional lattices for additive manufacturing, Materials (2019), 12, art. no. 1878.
  16. Rivas Santos, V.M., et al. Design and characterisation of an additive manufacturing benchmarking artefact following a design-for-metrology approach, Addit. Manuf. (2020), 32, art. no. 100964.
  17. Saint, R., et al. 3D-printed components for quantum devices, Sci. Rep. (2018), 8 (1), art. no. 8368.
  18. Maskery, I., et al. Insights into the mechanical properties of several triply periodic minimal surface lattice structures made by polymer additive manufacturing, Polymer (2018), 152, pp. 62-71.
  19. Elmadih, W., et al. Mechanical vibration bandgaps in surface-based lattices, Addit. Manuf. (2019), 25, pp. 421-429.
  20. Maskery, I., et al. Effective design and simulation of surface-based lattice structures featuring volume fraction and cell type grading, Mater. Des. (2018), 155, pp. 220-232.
  21. Thompson, A., et al. Effects of magnification and sampling resolution in X-ray computed tomography for the measurement of additively manufactured metal surfaces, Precis. Eng. (2018), 53, pp. 54-64.
  22. Zhang, Y., et al. Dynamic compressive response of additively manufactured AlSi10Mg alloy hierarchical honeycomb structures, Compos. Struct. (2018), 195, pp. 45-59.
  23. Syam, W.P., et al. Design and analysis of strut-based lattice structures for vibration isolation, Precis. Eng. (2018), 52, pp. 494-506.
  24. Thompson, A., et al. Internal surface measurement of metal powder bed fusion parts, Addit. Manuf. (2018), 20, pp. 126-133.
  25. Elmadih, W., et al. Designing low frequency band gaps in additively manufactured parts using internal resonators, Proc. 33rd ASPE Annual Meeting (2018), pp. 162-167.
  26. Rivas Santos, V.M., et al. Benchmarking of an additive manufacturing process, Proc. 2018 ASPE and euspen Summer Topical Meeting (2018), pp. 138-142.
  27. Xu, Z., et al. Staged thermomechanical testing of nickel superalloys produced by selective laser melting, Mater. Des. (2017), 133, pp. 520-527.
  28. Faludi, J., et al. Environmental impacts of selective laser melting: Do printer, powder, or power dominate? J. Ind. Ecol. 21 (2017), pp. S144-S156.
  29. Maskery, I., et al. Compressive failure modes and energy absorption in additively manufactured double gyroid lattices Addit. Manuf. 16 (2017), pp. 24-29.
  30. Aboulkhair, N.T., et al. Selective laser melting of aluminum alloys MRS Bull. 42 (2017), pp. 311-319.
  31. Leach, R., et al. A metrology horror story: The additive surface ASPEN/ASPE Spring Topical Meeting on Manufacture and Metrology of Structured and Freeform Surfaces for Functional Applications (2017).
  32. Thompson, A., et al. X-ray computed tomography and additive manufacturing in medicine: A review Int. J. Metrol. Qual. Eng. 8 (2017), art. no. 17.
  33. Syam, W.P., et al. Design of mechanically-optimised lattice structures for vibration isolation Proc. 17th Int. Conf. Eur. Soc. Precision Eng. Nanotechnol. (2017), pp. 55-56.
  34. Maskery, I., et al. An investigation into reinforced and functionally graded lattice structures J. Cell. Plast. 53 (2017), pp. 151-165.
  35. Aboulkhair, N.T., et al. Improving the fatigue behaviour of a selectively laser melted aluminium alloy: Influence of heat treatment and surface quality Mater. Des. 104 (2016), pp. 174-182.
  36. Maskery, I., et al. The effect of fracture toughness on the fatigue resistance of polyamide and reinforced lattice structures Mater. Sci. Eng. A 665 (2016), pp. 176-183.
  37. Aboulkhair, N.T. et al. The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment, Mater. Sci. Eng. A 667 (2016), pp. 139-146.
  38. Thompson, A. et al. X-ray computed tomography for additive manufacturing: A review, Meas. Sci. Technol. 27 (2016), art. no. 072001.
  39. Aboulkhair, N.T. et al. On the formation of AlSi10Mg single tracks and layers in selective laser melting: Microstructure and nano-mechanical properties, J. Mater. Process. Technol. 230 (2016), pp. 88-98.
  40. Elmadih, W.A. et al. Additively manufactured lattice structures for precision engineering applications, Proc. 32nd ASPE Annu. Meet. (2017), pp. 164-169.
  41. Everitt, N.M. et al. Nanoindentation shows uniform local mechanical properties across melt pools and layers produced by selective laser melting of AlSi 10Mg alloy, Adv. Mater. Lett. 7 (2016), pp. 13-16.
  42. Aremu, A.O. et al. Effects of net and solid skins on self-supporting lattice structures, Conf. Proc. Soc. Exp. Mech. Ser. 2 (2016), pp. 83-89.
  43. Maskery, I. et al. Quantification and characterisation of porosity in selectively laser melted Al-Si10-Mg using X-ray computed tomography, Mater. Charact. 111 (2016), pp. 193-204.
  44. Maskery, I. et al. Mechanical properties of Ti-6Al-4V selectively laser melted parts with body-centred-cubic lattices of varying cell size, Exp. Mech. 55 (2015), pp. 1261-1272.
  45. Simonelli, M. et al. A study on the laser spatter and the oxidation reactions during selective laser melting of 316L stainless steel, Al-Si10-Mg, and Ti-6Al-4V, Metall. Mater. Trans. A 46 (2015), pp. 3842-3851.
  46. Aboulkhair, N.T. et al. On the precipitation hardening of selective laser melted AlSi10Mg, Metall. Mater. Trans. A 46 (2015), pp. 3337-3341.
  47. Aboulkhair, N.T. et al. Nano-hardness and microstructure of selective laser melted AlSi10Mg scan tracks, Proceedings of SPIE - The International Society for Optical Engineering 9657 (2015), art. no. 965702.
  48. Burrows, C.W. et al. Heteroepitaxial growth of ferromagnetic MnSb(0001) films on Ge/Si(111) virtual substrates, Cryst. Growth Des. 13 (2013), pp. 4923-4929.
  49. Marsden, A.J. et al. Is graphene on copper doped?, Phys. Status Solidi RRL 7 (2013), pp. 643-646.
  50. Aldous, J.D. et al. Growth and characterisation of NiSb(0001)/GaAs(111)B epitaxial films, J. Cryst. Growth 357 (2012), pp. 1-8.
  51. Aldous, J.D. et al. Depth-dependent magnetism in epitaxial MnSb thin films: Effects of surface passivation and cleaning, J. Phys. Condens. Matter 24 (2012), art. no. 146002.
  52. Haynes, T.D. et al. Ferrimagnetism in Fe-rich NbFe2, Phys. Rev. B 85 (2012), art. no. 115137.
  53. Aldous, J.D. et al. Cubic MnSb: Epitaxial growth of a predicted room temperature half-metal, Phys. Rev. B 85 (2012), art. no. 060403.